Automotive Dual LTE router (Cat 7) and IEEE 802.11ac access point with integrated Gigabit Ethernet switch and additional interfaces. E1 compliant.
Fast LTE | Wi-Fi
5 GbE
Wi-Fi with 1.3 Gbps
The router supports LTE Cat 7 with download speeds up to 300 Mbps and 150 Mbps upload speed. When using two LTE modules in parallel the bandwidth will be increased up to 600 Mbps. For higher availability you can use redundant transmission paths. Two SIM sockets per LTE interface offer multi-provider support or least cost routing.
A fast CPU enables the full throughput of 1.3 Gbps of the WLAN standard IEEE 802.11ac with 3x3 MIMO and when used simultaneously in the 2.4 and 5 GHz range (dual-band mode) of up to 1.75 Gbit/s. The wireless access point is backwards compatible with Wi-Fi standard IEEE 802.11a/b/g/n for older end devices and a longer range.
Digital end devices such as IP cameras can be connected to the router via the 5-port Ethernet switch.
Two free sockets allow automotive-specific I/O extensions for vehicle buses such as CAN.
The integrated automotive power supply is fully compliant with E1 and tolerates input voltages from 8 to 32 V.
An optional internal SSD in the m.2 form factor enables storage and access to local data such as timetable information, videos, etc.
Easy-to-use web interface for easy remote configuration of the router, monitoring of settings, and for installing updates. Maintenance and monitoring of the devices via remote control systems are also possible with SNMP and shell scripts.
A configurable firewall protects personal data of client devices against unauthorized access (client isolation) via multi-level client/AP isolation and supports the secure and interference-free data exchange with the Internet. Unauthorized access is prevented both to end devices that have dialed into the same access point and across devices to end devices that are logged into different Westermo Eltec access points.
The automotive router is designed according to the international standard E1. Components have to meet the strictest environmental requirements for use in mobile applications, e.g. an extended temperature range. In addition, they must be resilient to shocks and vibrations.
Gateway with optional storage medium
Every generation in the same footprint for scalability, long-term availability and easy upgrades
Country-specific LTE/Wi-Fi standards for worldwide use in every type of vehicle
Integrated GPS receiver for vehicle tracking
Intelligent distribution of clients to access points and fair bandwidth allocation
Smooth and loss-free from access point to access point
Highest performance on smallest footprint: Up to 256 clients per access point
Simultaneous, uninterrupted live video streaming for more than 90 clients
Designed and manufactured in Germany
| CYRTA-2012 | CYRTA-2000 | ||
|---|---|---|---|
| 2 x LTE + 2 x Wi-Fi | 2 x LTE + 2 x Wi-Fi | ||
| LTE Cat 7 with up to 300 Mbps | LTE Cat 7 with up to 300 Mbps | ||
| IEEE 802.11ac with up to 1300 Mbps | IEEE 802.11ac with up to 1300 Mbps | ||
| 5 x 1 GbE | 5 x 1 GbE | ||
| 5 x RJ45 | 5 x RJ45 | ||
| Dual-Core CPU 1.2 GHz | Dual-Core CPU 1.2 GHz | ||
| 1 GB RAM | 1 GB RAM | ||
| 128 MB Flash | 128 MB Flash | ||
| - | 120 GB SSD | ||
| 12 - 24 VDC | 12 - 24 VDC | ||
| - | CAN module | ||
| GNSS | GNSS | ||
| 11 x QLS | 11 x QLS | ||
LTE Router
with 2 x LTE Cat 7, 2 x Wi-Fi 11ac, CAN and Dual-Core CPU
including all necessary accessories
